The composition of the boat switch is introduced, click to understand!

Rocker switch is also called rocker switch. Its structure is the same as that of the toggle switch, except that the toggle handle is changed to the rocker type. Rocker switch is often used as the power switch of electronic equipment, and its contacts are divided into single-pole single-throw and double-pole double-throw. Some switches also have indicator lights.

What are the types of switches for boat switches? Let's take a look.

Single pole single throw: 1 moving contact, 1 static contact, only 1 channel.

Single pole double throw: 1 moving contact and 2 static contacts (the static contacts on both sides can be connected separately).

Double pole single throw, 2 moving 2 static, 2 channels.

Double-pole double-throw, 2 moving contacts and 4 static contacts, with 4 channels (2 static contacts on both sides can be connected respectively).

Waterproof rocker switch, as the name suggests, is a kind of boat switch that can be used in humid environment or operated by wet hands. Waterproof rocker switch, as well as other names, such as wave switch, rocker switch, rocker switch, IO switch and power switch. Because the rocker switch looks like a ship, it is so called.

What is a good boat switch and what are the judgment methods? Let's take a look.

1. Hard to rust. The metal part of the boat switch is stainless steel instead of ordinary metal, so it is difficult to rust. If the equipment is found to be rusty during use or purchase, you should replace or avoid purchasing such products in time. It will bring you various problems during use.

2. The thickness of the copper sheet is high. In order to improve the ability of passing current, the boat switch manufacturers have thickened the thickness of the copper sheet, which not only improves the management of passing current, but also reduces the resistance and oxidation resistance of the copper sheet. This should be easy to see when buying. Of course, the thicker the better, the key is to see the quality of copper. I hope customers can pay close attention when buying products.

3. Strong toughness. Generally, the toughness of the boat switch is relatively strong, especially the socket part is difficult to deform, so it can be ensured that the appropriate bite force can be maintained to fix itself after the plug is completed.

What is the composition of the boat switch? Let's take a look.

1. First of all, the shell part of the product is not ordinary plastic, but with high strength and flame retardant characteristics of PA processing plastic, this shell can greatly increase the safety of this product, so that everyone in the use of more secure, encounter electrical fire can also be avoided in time.

2. Then, the stepped lifting lug design successfully meets the requirements of various panels, and there will be no loosening or failure to install the product after installation, because the thickness of the installation panel is too low or too high.

3. This part of the terminal is very important, because it determines the safety and stability of the customer when using electricity. Therefore, the part is made of copper alloy, and the surface of the terminal is plated with bright silver, which makes the product not only have good conductivity, but also Has a good antioxidant advantage, so that the service life of the product has been significantly improved.