The use of the boat switch note introduction, quick collection!

The function of the boat switch is to control, and the boat switch can control the switch of electrical equipment, the operation of machinery and the normal opening and closing of the circuit. What are the characteristics of the boat switch and how to measure its quality? Let's analyze it together.

1) From the outside, the boat switch looks like the shape of a boat, but the two ends of the button are the same. Just click on one end to open. In the design process, the basic requirement is to ensure the quality, whether it is copper, plastic or other materials, to ensure a long service life, and to be able to touch the control switch.

2) As far as the internal structure is concerned, the boat switch needs to be made of stainless steel or metal that is not easy to rust, so that it can be used for a longer time even in humid places, especially when purchasing. If there is rust, then you can see its quality.

3) The high thickness copper sheet can increase the current transmission efficiency, that is, to ensure the utilization rate of the switch. Although the response speed of the switch in actual operation is very fast, it can be improved in the accuracy test.

4) The toughness of the boat switch is much better, mainly in the socket part, it is not easy to deform after long-term use, and the original function can be maintained even if it is replaced. The shell of the switch should be made of high-strength industrial plastics with flame retardant properties, which can ensure the quality of the switch.

What are the fault problems of the boat switch? Let's analyze it together. Boat switch is very common when the red light is on. Sometimes it can't be turned off, but it can't bounce back. The air switch often trips.

The solution to the problem: There is a piece of metal inside the boat switch and a spring fulcrum in the middle. When the spring is displaced and the plastic bracket is aged and deformed, the switch will not work. You can disassemble it after power off. If the plastic parts are not damaged, It can be repaired. The neutral wire inside the switch is straight-through and has nothing to do with the switching element, so if the switch skips the air switch, the insulating layer of the neutral wire will be damaged, you can cut off the damaged part, rewire, pay attention to ensure insulation, or it may be that the indicator foot is short-circuited, just reconnect it.

What is the selection method of the boat switch? Let's analyze it together.

1. Whether the certification is complete. Whether the waterproof switch is fully certified, made of environmentally friendly materials, passed ROHS regulations and has SGS certification; With VDE/Demco/KEMA (now ENEC), UL/CSA and other certifications, only Arcolectric waterproof marine switches can be fully certified.

2.IP waterproof standard. The sealing performance of the boat switch exceeds the standard. With related accessories, it can reach IP65, IP66, IP67 and even IP68 waterproof grade.

3. Design aspects and other issues. Whether the waterproof switch has reasonable design, long service life, high temperature resistance and high current impact resistance should be considered.

What are the precautions for the use of the boat switch? Let's analyze it together.

The specific application of waterproof boat switch is restricted by many factors, such as: installation method, installation direction of the product, air flow, pressure difference acting on the product, strength of fluid rebound, working voltage and so on. Even if the Arcolectric waterproof boat switch with good sealing performance, its sealing technology has reached a very high level, it also means that the switch is completely sealed, and it is necessary to prevent the intrusion of corrosive gases or substances.