What is the characteristic, purchase and installation method of the boat switch?

What is the characteristic, purchase and installation method of the boat switch?

Features of 1. boat switch:

1. The boat switch is a mechanical device suitable for micro switch.

2. The boat switch is controlled and processed by programmable PLC. It is a combined shell and shrapnel detection integrated micro switch.

Automatic machine function checks from bulk materials to products, including products, are integrated.

3. The boat switch has advanced modeling, humanized planning and man-machine interface operation, which can supervise the whole process of the equipment. When the machine is defective, the operation interface will display the defect information in time. In order to check the short board, it is easy to operate and ensure peace of mind.

4. The production efficiency of the boat switch is high; the quality of the products produced is stable; the machine can be customized according to the different needs of customers, and plans can be made in time according to the different types of products and product requirements of customers. The ship type automatic switch machine capacity can reach 40 pcs/min,

how to buy 2. boat switch?

1. Look at the appearance.

Excellent switch, socket panel to use high-grade plastic products, raw materials look uniform, smooth surface.

2. Open the switch panel, you can see the internal structure of the switch and socket.

As far as the switch is concerned, the pure silver contact and the conductive sheet of the silver-copper composite material should generally be selected to prevent oxidation caused by the arc during the separation. A silver-nickel-copper composite was chosen as an excellent conductive bridge for the panel. The conductivity of silver is very excellent, and the ability of silver-nickel alloy to suppress the arc is very strong, so as to ensure that the switch can be opened and closed more than 80000 times, far exceeding the international standard of 40000 times. The excellent switch adopts brass screw wire, the contact surface is large and good, the crimping ability is strong, and the wiring is stable and reliable. Single hole wiring copper pillar, large wiring capacity, not limited by wire diameter thickness. In addition, 6 to 8 (upper, lower, left, right, four corners) fixed equipment holes are reserved on the product panel, which can move freely and are suitable for various equipment needs.

3. The first thing to consider about the boat switch is its safety.

The safety door of the boat switch is essential. When choosing a rocker switch, try to choose a product with a protective door. Secondly, check the tightness of the socket clip, stable insertion force is a key factor.

4. In addition to considering the safety of switches and sockets, its design is also valued by consumers who are constantly adding.

What is the installation method of 3. boat switch?

1. There are two open clips on both sides of the four-leg boat switch with light. Align the switch with the hole on the board and push the switch down until the clip clamps the switch on the board.

2. The 4-foot switch of marine power supply is often used as the power switch of electric heaters, electric rice cookers, electric cake pans, electric rice cookers and other electrical appliances to connect and disconnect the live wire and the zero wire together. I look forward to helping you (1 day ago)

3. At present, most switches adopt the method of elastic mechanical clamping, and the device is fast and convenient. As long as you press the switch from the outside of the panel, there are similar barb structures on both sides of the switch, which can be clamped by themselves and then connected to the wiring from the back. Pay attention to the correct opening and closing dimensions, otherwise the switch may be damaged or stuck.